Metal free cross-dehydrogenative N-N coupling of primary amides with Lewis basic amines.

Hydrazides, N-N containing structural motifs, are important due to their presence in a wide variety of biologically significant compounds. While the homo N-N coupling of two NH moieties to form the hydrazide N-N bond is well developed, the cross-dehydrogenative hetero N-N coupling remains very unevolved. Here we present an efficient intermolecular N-N cross-coupling of a series of primary benzamides with broad range of Lewis basic primary and secondary amines using PhI(OAc)2 as both a terminal oxidant and a cross-coupling mediator, without the need for metal catalysts, high temperatures, and inert atmospheres, and with substantial potential for use in the late-stage functionalization of drugs.

Quartz Crystal Microbalance Platform for SARS-CoV-2 Immuno-Diagnostics.

Rapid and accurate serological analysis of SARS-CoV-2 antibodies is important for assessing immune protection from vaccination or infection of individuals and for projecting virus spread within a population. The quartz crystal microbalance (QCM) is a label-free flow-based sensor platform that offers an opportunity to detect the binding of a fluid-phase ligand to an immobilized target molecule in real time. A QCM-based assay was developed for the detection of SARS-CoV-2 antibody binding and evaluated for assay reproducibility. The assay was cross-compared to the Roche electrochemiluminescence assay (ECLIA) Elecsys® Anti-SARS-CoV-2 serology test kit and YHLO's chemiluminescence immunoassay (CLIA). The day-to-day reproducibility of the assay had a correlation of r2 = 0.99, p < 0.001. The assay linearity was r2 = 0.96, p < 0.001, for dilution in both serum and buffer. In the cross-comparison analysis of 119 human serum samples, 59 were positive in the Roche, 52 in the YHLO, and 48 in the QCM immunoassay. Despite differences in the detection method and antigen used for antibody capture, there was good coherence between the assays, 80-100% for positive and 96-100% for negative test results. In summation, the QCM-based SARS-CoV-2 IgG immunoassay showed high reproducibility and linearity, along with good coherence with the ELISA-based assays. Still, factors including antibody titer and antigen-binding affinity may differentially affect the various assays' responses.

Surface sampling for SARS-CoV-2 RNA in workplace outbreak settings in the UK, 2021-22.

AIMS: To utilize environmental surface sampling to evaluate areas of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) contamination within workplaces to identify trends and improve local coronavirus disease 2019 (COVID-19) control measures. METHODS AND RESULTS: Surface sampling was undertaken at 12 workplaces that experienced a cluster of COVID-19 cases in the workforce between March 2021 and March 2022. A total of 7.4% (61/829) samples collected were positive for SARS-CoV-2 RNA by the quantitative PCR (qPCR) with only 1.8% (15/829) of samples identified with crossing threshold (Ct) values <35.0. No sample returned whole-genome sequence inferring RNA detected was degraded. CONCLUSIONS: Few workplace surface samples were positive for SARS-CoV-2 RNA and positive samples typically contained low levels of nucleic acid. Although these data may infer a low probability of fomite transmission within the workplace, Ct values may have been lower at the time of contamination. Workplace environmental sampling identified lapses in COVID-19 control measures within individual sites and showed trends throughout the pandemic.

A SARS-CoV-2 outbreak in a plastics manufacturing plant.

BACKGROUND: A SARS-CoV-2 outbreak with an attack rate of 14.3% was reported at a plastics manufacturing plant in England. METHODS: Between 23rd March and 13th May 2021, the COVID-OUT team undertook a comprehensive outbreak investigation, including environmental assessment, surface sampling, molecular and serological testing, and detailed questionnaires, to identify potential SARS-CoV-2 transmission routes, and workplace- and worker-related risk factors. RESULTS: While ventilation, indicated using real-time CO2 proxy measures, was generally adequate on-site, the technical office with the highest localized attack rate (21.4%) frequently reached peaks in CO2 of 2100ppm. SARS-CoV-2 RNA was found in low levels (Ct ≥35) in surface samples collected across the site. High noise levels (79dB) were recorded in the main production area, and study participants reported having close work contacts (73.1%) and sharing tools (75.5%). Only 20.0% of participants reported using a surgical mask and/or FFP2/FFP3 respirator at least half the time and 71.0% expressed concerns regarding potential pay decreases and/or unemployment due to self-isolation or workplace closure. CONCLUSIONS: The findings reinforce the importance of enhanced infection control measures in manufacturing sectors, including improved ventilation with possible consideration of CO2 monitoring, utilising air cleaning interventions in enclosed environments, and provision of good-quality face masks (i.e., surgical masks or FFP2/FFP3 respirators) especially when social distancing cannot be maintained. Further research on the impacts of job security-related concerns is warranted.

Iridium catalysed C2 site-selective methylation of indoles using a pivaloyl directing group through weak chelation-assistance.

Here we present an iridium catalysed C2-selective methylation of indoles using methyltrifluoroborate as a source of methyl group. The iridium catalyst selectively discriminates the indole C2 and C4 C-H bonds by coordination with a pivaloyl directing group.

Molecularly imprinted polymers for per- and polyfluoroalkyl substances enrichment and detection.

Per- and polyfluoroalkyl substances (PFAS) are highly toxic pollutants of significant concern as they are being detected in water, air, fish and soil. They are extremely persistent and accumulate in plant and animal tissues. Traditional methods of detection and removal of these substances use specialised instrumentation and require a trained technical resource for operation. Molecularly imprinted polymers (MIPs), polymeric materials with predetermined selectivity for a target molecule, have recently begun to be exploited in technologies for the selective removal and monitoring of PFAS in environmental waters. This review offers a comprehensive overview of recent developments in MIPs, both as adsorbents for PFAS removal and sensors that selectively detect PFAS at environmentally-relevant concentrations. PFAS-MIP adsorbents are classified according to their method of preparation (e.g., bulk or precipitation polymerization, surface imprinting), while PFAS-MIP sensing materials are described and discussed according to the transduction methods used (e.g., electrochemical, optical). This review aims to comprehensively discuss the PFAS-MIP research field. The efficacy and challenges facing the different applications of these materials in environmental water applications are discussed, as well as a perspective on challenges for this field that need to be overcome before exploitation of the technology can be fully realised.

Diyne-steered switchable regioselectivity in cobalt(II)-catalysed C(sp2)-H activation of amides with unsymmetrical 1,3-diynes.

The regiochemical outcome of a cobalt(II) catalysed C-H activation reaction of aminoquinoline benzamides with unsymmetrical 1,3-diynes under relatively mild reaction conditions can be steered through the choice of diyne. The choice of diyne provides access to either 3- or 4-hydroxyalkyl isoquinolinones, paving the way for the synthesis of more highly elaborate isoquinolines.

Highly Efficient Recovery and Recycling of Cobalt from Spent Lithium-Ion Batteries Using an N-Methylurea-Acetamide Nonionic Deep Eutectic Solvent.

The growing demand for lithium-ion batteries (LiBs) for the electronic and automobile industries combined with the limited availability of key metal components, in particular cobalt, drives the need for efficient methods for the recovery and recycling of these materials from battery waste. Herein, we introduce a novel and efficient approach for the extraction of cobalt, and other metal components, from spent LiBs using a nonionic deep eutectic solvent (ni-DES) comprised of N-methylurea and acetamide under relatively mild conditions. Cobalt could be recovered from lithium cobalt oxide-based LiBs with an extraction efficiency of >97% and used to fabricate new batteries. The N-methylurea was found to act as both a solvent component and a reagent, the mechanism of which was elucidated.

Smart bio-nano interface derived from zein protein as receptors for biotinyl moiety.

Proteinaceous, tunable nanostructures of zein (prolamine of corn) were developed as biotinyl-specific receptors using a molecular imprinting technique. Sacrificial templates, such as latex beads (LB3) and anodized alumina membrane (AAM), have been used to control nanostructural patterns in biotin-imprinted zein (BMZ). Briefly, a methanolic solution of the zein-biotin complex was drop cast upon a self-organized LB3 and AAM templates on Au/quartz surfaces. Subsequent dissolution of these sacrificial templates affords highly oriented, predetermined, and uniformly grown hyperporous (300 nm) and nanowires (150 nm) motifs of zein (BMZ-LB3 and BMZ-AAM), as shown by scanning electron microscopy (SEM). Selective extraction of biotin molecular template cast-off site-selective biotin imprints within these zein nanostructures complementary to biotinyl moieties. Alternatively, biotin-imprinted zein nanoparticles (BMZ-Np) and thin film (BMZ-MeOH) were prepared by coacervation and drop casting methods, respectively. Density functional theoretical (DFT) studies reveal strong hydrogen-bonded interaction of biotin with serine and glutamine residues of zein. Quartz crystal microbalance (QCM) studies show remarkable sensitivity of the hyperporous-BMZ-LB3 and nanowires of BMZ-AAM towards biotin derivative (biotin methyl ester) by five (24.75 ± 1.34 Hz/mM) and four (18.19 ± 0.75 Hz/mM) times, respectively, higher than the BMZ-MeOH. Enhanced permeability features of the zein nanostructures, when templated with LB3, enable the QCM detection of biotin- or its derivatives down to 12.9 ng mL-1 from dairy products (Kefir). The outcome of this study shall be a key aspect in interfacing biological materials with micro-/nano-sensors and electronic devices for detecting pertinent analytes using sustainably developed biopolymer-based nanostructures.

Porosity of Molecularly Imprinted Polymers Investigated by 129Xe NMR Spectroscopy.

Molecularly imprinted polymers (MIPs) display intriguing recognition properties and can be used as sensor recognition elements or in separation. In this work, we investigated the formation of hierarchical porosity of compositionally varied MIPs using 129Xe Nuclear Magnetic Resonance (NMR) and 1H Time Domain Nuclear Magnetic Resonance (TD-NMR). Variable temperature 129Xe NMR established the morphological variation with respect to the degree of cross-linking, supported by 1H TD-NMR determination of polymer chain mobility. Together, the results indicate that a high degree of cross-linking stabilizes the porous structure: highly cross-linked samples display a significant amount of accessible mesopores that instead collapse in less structured polymers. No significant differences can be detected due to the presence of templated pores in molecularly imprinted polymers: in the dry state, these specific shapes are too small to accommodate xenon atoms, which, instead, probe higher levels in the porous structure, allowing their study in detail. Additional resonances at a high chemical shift are detected in the 129Xe NMR spectra. Even though their chemical shifts are compatible with xenon dissolved in bulk polymers, variable temperature experiments rule out this possibility. The combination of 129Xe and TD-NMR data allows attribution of these resonances to softer superficial regions probed by xenon in the NMR time scale. This can contribute to the understanding of the surface dynamics of polymers.

Correction: Palladium nanoparticles immobilized on polyethylenimine-derivatized gold surfaces for catalysis of Suzuki reactions: development and application in a lab-on-a-chip context.

[This corrects the article DOI: 10.1039/D1RA06851B.].

Investigation of a SARS-CoV-2 Outbreak at an Automotive Manufacturing Site in England.

Workplace-related outbreaks of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) continue to occur globally. The manufacturing sector presents a particular concern for outbreaks, and a better understanding of transmission risks are needed. Between 9 March and 24 April 2021, the COVID-19 (coronavirus disease 2019) Outbreak Investigation to Understand Transmission (COVID-OUT) study undertook a comprehensive investigation of a SARS-CoV-2 outbreak at an automotive manufacturing site in England. The site had a total of 266 workers, and 51 SARS-CoV-2 infections. Overall, ventilation, humidity, and temperature at the site were assessed to be appropriate for the number of workers and the work being conducted. The company had implemented a number of infection control procedures, including provision of face coverings, spacing in the work, and welfare areas to allow for social distancing. However, observations of worker practices identified lapses in social distancing, although all were wearing face coverings. A total of 38 workers, including four confirmed cases, participated in the COVID-OUT study. The majority of participants received COVID-19 prevention training, though 42.9% also reported that their work required close physical contact with co-workers. Additionally, 73.7% and 34.2% had concerns regarding reductions in future income and future unemployment, respectively, due to self-isolation. This investigation adds to the growing body of evidence of SARS-CoV-2 outbreaks from the manufacturing sector. Despite a layered COVID-19 control strategy at this site, cases clustered in areas of high occupancy and close worker proximity.

Oxytocin-Selective Nanogel Antibody Mimics.

Oxytocin imprinted polymer nanoparticles were synthesized by glass bead supported solid phase synthesis, with NMR and molecular dynamics studies used to investigate monomer-template interactions. The nanoparticles were characterized by dynamic light scattering, scanning- and transmission electron microscopy and X-ray photoelectron spectroscopy. Investigation of nanoparticle-template recognition using quartz crystal microbalance-based studies revealed sub-nanomolar affinity, kd ≈ 0.3 ± 0.02 nM (standard error of the mean), comparable to that of commercial polyclonal antibodies, kd ≈ 0.02-0.2 nM.

Making nanostructured materials from maize, milk and malacostraca.

Nano-structured materials are used in electronics, diagnostics, therapeutics, smart packaging, energy management and textiles, areas critical for society and quality of life. However, their fabrication often places high demands on limited natural resources. Accordingly, renewable sources for the feedstocks used in their production are highly desirable. We demonstrate the use of readily available biopolymers derived from maize (zein), milk (casein) and malacostraca (crab-shell derived chitin) in conjunction with sacrificial templates, self-assembled monodisperse latex beads and anodized aluminium membranes, for producing robust surfaces coated with highly regular hyperporous networks or wire-like morphological features, respectively. The utility of this facile strategy for nano-structuring of biopolymers was demonstrated in a surface based-sensing application, where biotin-selective binding sites were generated in the zein-based nano-structured hyperporous network.

Molecularly Imprinted Chitosan-Based Thin Films with Selectivity for Nicotine Derivatives for Application as a Bio-Sensor and Filter.

This study reports the feasible use of chitosan as a thin film biosensor on the very sensitive quartz crystal micro balance system for detection of blends of multiple templates within a single matrix. The development of chitosan-based thin film materials with selectivity for nicotine derivatives is described. The molecular imprinting of a combination of nicotine derivatives in N-diacryloyl pipiradine-chitosan-methacrylic acid copolymer films on quartz crystal resonators was used to generate thin films with selectivity for nicotine and a range of nicotine analogues, particularly 3-phenylpyridine. The polymers were characterized by spectroscopic and microscopic evaluations; surface area, pore size, pore volume using Breuner-Emmet-Teller method. Temperature characteristics were also studied. The swelling and structure consistency of the Chitosan was achieved by grafting with methylmethacrylic acid and cross-linking with N-diacrylol pipiradine. A blend of 0.002 g (0.04 mmol) of Chitosan, 8.5 µL Methylmethacrylic Acid and 1.0 mg N-diacrylol pipradine (BAP) presented the best blend formulation. Detections were made within a time interval of 99 s, and blend templates were detected at a concentration of 0.5 mM from the Quartz crystal microbalance resonator analysis. The successful crosslinking of the biopolymers ensured successful control of the swelling and agglomeration of the chitosan, giving it the utility potential for use as thin film sensor. This successful crosslinking also created successful dual multiple templating on the chitosan matrix, even for aerosolized templates. The products can be used in environments with temperature ranges between 60 °C and 250 °C.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers.

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Improved Solvothermal Synthesis of γ-Fe2O3 Magnetic Nanoparticles for SiO2 Coating.

Monodisperse magnetic γ-Fe2O3 nanoparticles (MNPs) were prepared by a simple, improved, one-pot solvothermal synthesis using SDS and PEG 6000 as double capping reagents. This double protecting layer afforded better MNP uniformity (Z average 257 ± 11.12 nm, PDI = 0.18) and colloidal stability. Materials were characterized by DLS, SEM, TEM, XPS, and XRD. The use of these MNPs in the synthesis of core-shell structures with uniform and tunable silica coatings was demonstrated, as silica coated MNPs are important for use in a range of applications, including magnetic separation and catalysis and as platforms for templated nanogel synthesis.

Using Molecular Dynamics in the Study of Molecularly Imprinted Polymers.

Molecular dynamics (MD) simulations of prepolymerization mixtures can provide detailed insights concerning the molecular-level mechanisms underlying the performance of molecularly imprinted polymers (MIPs) and can be used for the in silico screening of candidate polymer systems. Here, we describe the use of MD simulations of all-atom, all-component MIP prepolymerization mixtures and procedures for the evaluation of the simulation data using the Amber simulation software suite.

Discovery of Icenticaftor (QBW251), a Cystic Fibrosis Transmembrane Conductance Regulator Potentiator with Clinical Efficacy in Cystic Fibrosis and Chronic Obstructive Pulmonary Disease.

Mutations in the cystic fibrosis transmembrane conductance regulator (CFTR) ion channel are established as the primary causative factor in the devastating lung disease cystic fibrosis (CF). More recently, cigarette smoke exposure has been shown to be associated with dysfunctional airway epithelial ion transport, suggesting a role for CFTR in the pathogenesis of chronic obstructive pulmonary disease (COPD). Here, the identification and characterization of a high throughput screening hit 6 as a potentiator of mutant human F508del and wild-type CFTR channels is reported. The design, synthesis, and biological evaluation of compounds 7-33 to establish structure-activity relationships of the scaffold are described, leading to the identification of clinical development compound icenticaftor (QBW251) 33, which has subsequently progressed to deliver two positive clinical proofs of concept in patients with CF and COPD and is now being further developed as a novel therapeutic approach for COPD patients.